SEH ThinPrint TPG120, Руководство пользователя, Страница: 53 / 120

ThinPrint® Settings
TPG User Manual 53
Defining the ThinPrint® Port via the InterCon-NetTool
Proceed as follows:
1. Start the InterCon-NetTool.
2. Double-click the TPG in the device list.
The Properties dialog appears.
3. Select Configuration – ThinPrint® from the navigation bar.
4. Enter the port number into the ThinPrint® port box.
5. Click OK to confirm.
ª
The setting is saved.
5.2 How to Define the Bandwidth
Bandwidth describes the capacity of a data connection. The band-
width of the TPG is indicated in bit/second (bit/s).
The bandwidth that is needed for print jobs can be limited to a fre-
ely definable value for each ThinPrint® port (server side). You can
further decrease the bandwidth limit on the port of the TPG (client
side).
Defining a bandwith value on the TPG which is higher than the defi-
ned value (server side) will have no effect. In this case, the pre-defi-
ned value will be applied.
What do you want
to do?
†
’Decrease the Bandwidth via the TPG Homepage’
Ö
53
†
’Decrease the Bandwidth via the InterCon-NetTool’
Ö
54
Decrease the Bandwidth via the TPG Homepage
Proceed as follows:
1. Start the TPG Homepage.
2. Select
Configuration – ThinPrint® .
3. Tick Bandwidth .
4. Enter the desired bandwidth.