manualshive.com logo in svg

SEH ThinPrint TPG120, Руководство пользователя, Страница: 35 / 120

Поделиться
Скачать
SEH ThinPrint TPG120 Скачать руководство пользователя страница 35

Status Information

TPG User Manual

35

3.4

How to Display the Job History

You can get information about the print jobs that have been sent to
the TPG. The print jobs are registered and shown in the Job History.

A maximum of 64 print jobs are displayed. The first-in, first-out
method is applied from the 65th print job onwards. The saved print
jobs will be deleted when the TPG is turned off or reset. The print
jobs will not be deleted when the TPG is restarted.

What do you want

to do?

†

’Displaying the Job History via the TPG Homepage’ 

Ö

35

†

’Displaying the Job History via the InterCon-NetTool’ 

Ö

35

Displaying the Job History via the TPG Homepage

Proceed as follows:

1. Start the TPG Homepage.
2. Select 

Status – Job History

.

ª

The Job History is displayed.

Displaying the Job History via the InterCon-NetTool

Proceed as follows:

1. Start the InterCon-NetTool.
2. Double-click the TPG in the device list.

The 

Properties

 dialog appears.

3. Select 

Status – Job History

 from the navigation bar.

ª

The Job History is displayed.

Содержание ThinPrint TPG120

























































































































Отзывы:

Нет отзывов