Sega THE HOUSE OF THE DEAD III DELUXE, Руководство оператора

Страница: 83 / 112

74
www.seuservice.com
75
www.seuservice.com
CONVERGENCE ADJUSTMENT (manual color matching)
To avoid circuitry malfunctioning due to electrical load increase, never utilize
CONVERGENCE ADJUSTMENT (Line Convergence Adjustment in particular)
for adjusting screen size changes.
There is no means to restore the Convergence Adjustment data once stored, to its
original state. To avoid changing the screen size by erroneously using convergence
adjustment, do not perform the green Line Convergence Adjustment.
As such, be sure to perform the adjustment work from this page onward by the Tech-
nical staff and the location's Maintenance Personnel who are well versed in such ad-
justment work. In the Static Convergence Adjustments, if satisfactory adjustments
can not be performed, do not make another convergence adjustments inadvertently.
Contact the office herein stated or where the product was purchased from.
●
To avoid making the adjustment work ineffective, do not press the RESET but-
ton during adjustment.
●
To discontinue adjustment work, keep pressing the TEST button for approxi-
mately 3 seconds at the stage before storing the adjustment data by pressing the
WRITING button.
●
Should the screen be abnormally disturbed by noise due to static electricity, etc.,
turn the power off without storing the adjustment data.
●
Pressing the

or

PIC - ADJ button
in the Convergence Adjustment mode
status will display the Adjustment Menu
shown right. Do not utilize this Adjust-
ment Menu as this is the one applied at
the factory.
●
Adjusting this menu causes the Custom-
er's adjustment range to be deviated.
●
Should the menu shown right be dis-
played by mistake, first choose EXIT by
using either

or

PIC - ADJ button
and then press the SET button.
ADJUST MODE
SUB VSIZE
SUB HSIZE
SUB BRIGHT
EXIT
Adjustment menu used in the factory.
STOP
IMPORTANT!
CAUTION!