Sega THE HOUSE OF THE DEAD III DELUXE, Руководство оператора

Страница: 59 / 112

51
www.seuservice.com
To clear data, use the SERVICE Button to move the cursor to YES (CLEAR) and press the TEST
Button. When the data has been cleared, the message "COMPLETED" is displayed.
Press the TEST Button again to return to the NETWORK SETTING main screen.
Move the cursor to NO (CANCEL) and press the TEST Button to return to the NETWORK
SETTING main screen without clearing the data.
(D) NETWORK TEST
In this test, the checking for the communication network can be performed.
Entering this test mode, checking starts immediately.
The display changes to "GOOD" when the checking is finished successfully, and changes to
"BAD" when any problem is detected. If the connection is not permitted, the display will change
to "N/A".
If you perform this test immediately after the setting change, it may not display the correct result.
In this case, be sure to turn the power off and on, and enter this test mode again.
(C) CLEAR NETWORK SETTING
Use this to return all values in the NETWORK SETTING to the default values and turn off
network communication.
CLEAR NETWORK SETTING
->YES (CLEAR)
NO (CANSEL)
SELECT WITH SERVICE BUTTON
AND PRESS TEST BUTTON
NETWORK TEST
VERSION *.**
STATUS GOOD
CHECKING 100%
**** MODE
CHECKING NETWORK
LOOPBACK - GOOD
GATEWAY -- N/A
SERVER --- N/A
-- COMPLETED --
PRESS TEST BUTTON TO EXIT