Sega THE HOUSE OF THE DEAD III DELUXE, Руководство оператора

Страница: 76 / 112

68
www.seuservice.com
69
www.seuservice.com
9. PROJECTOR
FIG. 11. 1
Since the Projector has been adjusted at the time of shipment, avoid making
further adjustments without good reason.
The Projector is subject to color deviation due to Convergence deviation caused
by the geomagnetism at the installation location and peripheral magnetic field.
After the installation of machine, and before commencing operation, check for
Convergence deviation and if deviated, make adjustments.
When the screen surface
becomes dirty with dust,
etc., clean it by using a
soft cloth such as gauze.
When water, and volatile
chemicals such as benzine,
thinner, etc., spill on the
screen surface, it may be
subject to damage, therefore,
do not use them. Also, since
the surfaces are susceptible
to damage, refrain from
rubbing them with a hard
material or using a duster.
9 - 1 CLEANING THE SCREEN
Since the Projector screen is susceptible to damage, pay careful attention to its
handling. When cleaning, refrain from using water or volatile chemicals.
Projector adjustments are stored. Due to distortion or color deviation in the TEST mode, if an
adjustment is necessary, use the Remote Control to make adjustments.
STOP
IMPORTANT!
CAUTION!
CAUTION!
*NOTE: Picture may differ from actual unit.