Seg osaka, Руководство по эксплуатации

Страница: 45 / 60

- 43 -
When VGA Or DVI Is Connected To TV:
GRZQIRUVL]HVHWWLQJ
LPDJHVL]H
ZLQGRZ
ILOODOO
image size
By pressing “ ” / “ ” button, select image
size. "right/left to change image size" is
seen on the screen. By pressing “ ” / “ ”
button, you can change image size to fill all,
fill 1:1 and fill aspect .
audio menu
By pressing “ ” / “ ” button, select the
fourth icon. Audio menu appears on the
screen.
GRZQIRUDXGLRDGMXVWPHQWV
YROXPH
KSYROXPH
EDODQFH
HTXDOL]HU
DXGLR
KSVRXQGPRGH PRQR
$9/
ZLGHVRXQG
'ROE\9LUWXDO
RQ
RQ
RII
volume
By pressing “ ” / “ ” button, select volume.
"right/left to adjust volume" is seen on the
screen. Press “ ” button to increase vol-
ume level. Press “ ” button to decrease vol-
ume level. Volume level can be adjusted be-
tween 0 and 63.
hp volume
By pressing “ ” / “ ” button, select hp vol-
ume. "right/left to adjust hp volume" is
seen on the screen. Press “ ” button to in-
crease hp volume level. Press “ ” button to
decrease hp volume level. Hp volume
(headphone volume) level can be adjusted
between 0 and 100.
hp sound mode
By pressing “ ” / “ ” button, select hp
sound mode. "right to adjust hp sound
mode" is seen on the screen. Press “ ”
button change hp sound mode.
Hp sound mode is used to identify sound
mode of the headphone. hp sound mode can
be set to mono, stereo, dual a or dual b ac-
cording to the transmission.
balance
By pressing “ ” / “ ” button, select balance.
"right/left to adjust balance" is seen on the
screen. Press “ ” button to increase bal-
ance rightward. Press “ ” button to de-
crease balance leftward. Balance level can
be adjusted between -50 and 50.
Dolby Virtual
This function creates a 3-dimensional
sound by using your 2 existing loudspeak-
ers on your TV set. It does not need any ad-
ditional center or surround speakers. You
must be close to your TV set (about 3
meters) and be in front of it to hear the Dolby
Virtual effect better.
If Dolby Virtual is set to on , equlizer , AVL ,
wide sound and dynamic bass become in-
active and can not be accessed.
equalizer
By pressing “ ” / “ ” button, select equal-
izer. "right/left for equalizer settings" is
seen on the screen. Press “ ” / “ ” or “ OK ”
button to enter equalizer menu. In equalizer
menu the sound mode can be changed to
user, flat, pop, rock, jazz and classic by
pressing “ ” / “ ” button. Equalizer menu
settings can be changed only when sound
mode is user. Select the desired frequency
by “ ” / “ ” button and increase or decrease
the frequency gain by pressing “ ” / “ ” but-
ton.
“M” button to exit the equalizer menu.
02-ENG-3008W-1546 UK-VIRTUAL DOLBY-30 INCH TFT-(CHI MEI).p65 05.08.2004, 09:05 43