51
7 TROUBLESHOOTING
DANGER!
• Never connect the device to the power supply if the device, the power cord or the
mains plug are visibly damaged.
• In case of danger or in case of a defect, remove the mains plug immediately from the
socket.
• Never try to repair the device yourself. If your device does not work properly, contact
the dealer from where you purchased the device.
• If the power supply cord is damaged it may only be replaced by the manufacturer or
by a manufacturer-authorized after-sales service or by a qualifi ed specialist (electrical
engineer) to avoid hazards.
• Never operate a defective device. Never operate a device that has fallen down.
If failures occur during operation, please check the following table to see if you can solve
the problem yourself. All other repairs are prohibited and the warranty is void.
Problem
Reason
Action
Device will not switch on.
Device is not connected to
the power supply.
Plug the power plug into a
socket outlet with earthed
contact.
Coff ee does not fl ow out of
the outlet (drip-stop).
Coff ee pot is not placed
correctly under outlet.
Check that the coff ee pot is
placed correctly on the hot
plate and that it presses up
the valve in the outlet.
Coff ee is too watery.
Grind set is too coarse.
Adjust the grind fi ner, see
chapter 5.1 – BREWING
COFFEE WITH COFFEE
BEANS.
Coff ee is too watery.
Not enough ground coff ee. Check the dosage table,
see chapter 5.2 – BREWING
COFFEE WITH GROUND
COFFEE.
Содержание KM 1025
Страница 55: ......