40
4 PREPARING THE DEVICE
Unpack
1. Carefully unpack the device. Follow the instructions for disposal of packaging materials
in chapter 9 – DISPOSAL.
2. The device may be protected for transport with transport locks. Remove these
completely. Do not use aggressive cleaners to remove remains of the transport locks.
3. Before connecting the device, check that the power cord or the device itself have no
damages.
4. Check if content comprises all equipment parts, see chapter 2 – CONTENT/
EQUIPMENT.
5. Make sure that the device is disconnected from the power supply.
Selection of suitable location
Set up the device in a suitable place:
• near a safety socket with 10 A minimum protection
• horizontal and vibration-free
• heat resistant
• does not react with rubber feet
• with a reasonable distance to extreme heat sources (> 1m)
• with minimum distance of 15 cm from walls
Initial cleaning
1. Open the swing-out filter (5) with the opening button (11).
2. Remove the filter cover (1), permanent filer (2) and filter insert (3).
3. Clean all removable parts such as filter cover (1), permanent filter (2), filter insert (3)
coffee pot (6) and measuring scoop (7) before first use, in warm water, possibly with a
mild detergent. All parts can also be cleaned in the dishwasher.
4. After cleaning, place the filter insert (3) in the swing-out filter (5).
5. Place the permanent filter (2) into the filter insert (3).
Содержание KM 1025
Страница 55: ......
