Seepex BCSB 025-12, Руководство по эксплуатации и сборке

Страница: 38 / 62

32
9
Dismantling / Reassembly
Ausgabe
issue
D / 15.03.2010
Dokument
document
OM.MAI.51e
Blatt
sheet
4 (5)
9.1.3.2 Rotor (600), coupling rod (400), plug-in shaft (307) - reassembly
9.1.3.3 Rotating unit (RTE) - reassembly
With flush connection

Mount the flush connection.
9.1.3.4 Suction casing (500) - reassembly

Joint (G) reassembly
– Note rotating unit - individual parts
(chapter 9._).
600 400 307
G G

Assemble shaft seal casing (SEA).
– Note reassembly shaft seal
(chapter 9._).

Moisten splash ring (310)/plug-in shaft
(307) with joint grease.

Slide splash ring (310) onto plug-in shaft
(307).
– Observe fitting position of splash ring
(see writing on splash ring).

Apply antiseize graphite petroleum to the
output shaft of drive (ANT).

Slide on rotating unit (RTE).
307 SEA 310 ANT

Provide rotor (600) with protective cover
(SH).

Prop up rotor (600) with support (S).

Slide on casing gasket (501).

Mount suction casing (500) and adjust (us-
ing spirit level).

Secure the suction casing (500) with hexa-
gon nut (509 and 624).
SH
600
S
500 501 624 509
S
500
624
509
~0.5