Seepex BCSB 025-12, Руководство по эксплуатации и сборке

Страница: 36 / 62

30
9
Dismantling / Reassembly
Ausgabe
issue
D / 15.03.2010
Dokument
document
OM.MAI.51e
Blatt
sheet
2 (5)
9.1.2.2 Stator (601) - dismantling
9.1.2.3 Suction casing (500) - dismantling
9.1.2.4 Rotating unit (RTE) – dismantling
With flush connection

Lift/slide splash ring (310).

Push out plug-in shaft pin (309) horizontal-
ly.

Turn plug-in shaft pin (309) upwards.
Tool (W2/chain pipe wrench)

Add lubricant (liquid soap) to the opening
on pressure branch side between the rotor
(600) and the stator (601).

Turn the stator (601) in the “right” rotating
direction.

Dispense lubricant (GM) on the stator in-
ternal surface in order to reduce friction
between the rotor and stator.

Prop up the rotor (600) with support (S).
600
S
W2
601
GM

Provide rotor (600) with protective cover
(SH).

Prop up rotor (600) with support (S).

Remove plug-in shaft pin (309).

Dismantle the suction casing (500).
SH
600
S
500 501 624 509
309
Tool (W10/ dismantling of the plug-in shaft)

Remove the flush connection (SSÜ) on the
casing of the shaft seal (SEA).

Pull the rotating unit (RTE) with shaft seal
(SEA) off from the output shaft of the drive
(ANT).

Dismantle shaft seal (SEA).
– Note dismantling shaft seal
(chapter 9._).
RTE
SEA SSÜ 307
ANT 310
506