Seeley CW-H 2020 PLC, Руководство пользователя

Страница: 17 / 32

CW-H COOLER PLC OWNER’S MANUAL 859731-D
|
15
OPERATION SCREENS
EDIT THE 7-DAY PROGRAM
To edit the 7-day program, press the EDIT button..
ILL3653-C
Each day is divided into four time periods with the user able to set when each of these periods
starts and ends and the required temperature / relative humidity* set-points.
In the above example, the connected coolers are programmed for the following sequence;
07:00 – Turn ON, with set-points of 24C and 60% RH
11:00 – Turn OFF (set-points are ignored)
16:00 – Turn ON, with set-points of 24C and 60% RH
22:00 – Turn OFF (set-points are ignored)
Press the left and right arrow buttons to cycle through each day of the week. When finished setting
a schedule for a particular day, press SAVE DAY. Alternatively, press SAVE ALL to save the shown
schedule to all days.
*Note: Relative humidity set point buttons are only available if CW-H Supercool cooler(s) are
detected during Network Setup.
ILL3653-C
SET PERIOD STATUS AND
START TIME
SAVE PROGRAM TO ALL DAYS
PRESS TO CYCLE THROUGH ALL
DAYS
* SET PERIOD TEMPERATURE AND
HUMIDITY SET POINTS
SAVE PROGRAM TO DAY
SELECTED AT THE TOP OF
SCREEN