Sedna SE-DECT-V1, Руководство пользователя

Страница: 8 / 39

Setting up
3 Setting up
3.1 Safety information
Note: Before setting up, it is essential that you read the General information at the beginning of this
operating manual.
3.2 Check contents of pack
The following items are supplied:
One base station
One main cable
One handset with belt clip Two standard batteries
One telephone connecting cable One instruction manual
3.3 Connecting the base station
Position the telephone near to your telephone connection socket and to a main socket.
1.
Insert the plug of the power supply into the socket on the underside of
the base station and plug the power supply into a properly installed 230
V main socket. The plug-in power supply for the base station must
always be connected. For safety reasons, use only the plug-in main
power supply provided.
2. Connect the telephone cable supplied to the telephone socket and the
telephone jack on the underside of the base station. Use only the new
telephone cable provided.
3. Run the two cables through the two cable channels to the rear of the
base station.
3.4 Fitting standard batteries
To fit the standard rechargeable
batteries supplied into the handset,
press on the upper edge of the battery
compartment and slide it downwards.
Now insert the batteries taking care to
ensure that the polarity is correct. Close the battery compartment
cover.
- 8 -