4.11
Keypad lock
If you frequently carry the handset with you, you can lock the keypad so that buttons are not pressed
unintentionally. Incoming calls can be received as normal when the keypad lock is switched on.
Activating the keypad lock
Press the
button on the handset for three seconds. HS LOCKED will appear in the display.
Deactivating the keypad lock
To deactivate the keypad lock, press the
button for three seconds.
4.12
Temporary tone dialing
If you can only use your telephone in Pulse dialing mode, you do not have to forego the facilities of Tone
dialing (e.g. interrogating an answering machine). You can change temporarily to Tone Dialing during a
call by means of the
button (press 4 seconds). PULSE dialing will be reselected at the end of the call.
4.13
Paging from the base station to the handset
If you cannot remember where you have left the handset, press the
button on the base station. You
will hear the handset audible signals for 30 seconds and thus be able to find it again easily. You can cancel
the audible signals earlier by pressing any button on the handset or the
button on the base station.
4.14
Using the wake-up/alarm function
Operation
You can enter an alarm time using the integral wake-up and alarm function. When this time is reached
you will hear signal tones from the mobile unit for one minute and the display will show the message
ALARM To cancel the alarm, press any button on the mobile unit.
Note: the volume of the alarm depends on the volume set for the ring tone. If the ring tone on the mobile
unit is turned off altogether, the alarm will sound at the lowest volume.
4.14.1 Setting the wake-up/alarm time
1.
Press the menu button
.
2.
Select the HS SETTINGS menu with
and
and confirm with
3.
Message will show ALARM menu with
and
and confirm with
4.
Select the ON setting with
and
and confirm with the
button.
5.
Now enter the required wake-up time in 24-hour format using the number pad. Example: 4:45 PM
->16:45
Now enter the required wake-up time in 12-hour format using the number pad. Example: 4:45 PM
-> P 04:45(AM/PM Switch select key
.)
6.
Confirm with the
button. The display will show the message SNOOSE ON. Select the ON or
OFF setting with
and
and confirm with the
button.
7.
Now select further menu functions or exit the menu by pressing and holding the
button.
4.14.2 Switching off the wake-up/alarm function early
1.
Pressing the menu button
2.
Select the HS SETTINGS menu with
and
and confirm with
3.
Message will show ALARM menu with
and
and confirm with
4.
Select the OFF setting with
and
and
confirm with the button.
- 14 -
Содержание SE-DECT-V1
Страница 1: ...DECT Wireless PSTN VoIP 2 in 1 phone User manual...
Страница 34: ...3 4 34...
Страница 35: ...5 6 35...
