Sedna SE-DECT-V1, Руководство пользователя

Страница: 19 / 39

Caller display CLID
6.3 Deleting individual telephone numbers from the caller list
1. Press the button and the last phone number received will be shown in the display.
2. Now select the telephone number from the caller list that you want to delete by using the
and buttons.
3. Press the button. The display will show the message DELETE ?.
4. Again confirm with the menu button and the number will be deleted from the caller list
5. Press button to exit the caller list.
6.4 Deleting the entire caller list
1. Press the button and the last phone number received will be shown in the display.
2. Hold the button pressed until the message DELETE ALL? appears in the display.
3. Confirm with the button and all the number will be deleted from the caller list after return to idle
mode.
T-NET / Private exchanges
7 T-NET mode / Private exchanges
You can use the “ R” signal button on your telephone on private exchanges and when using DEUTSCHE
TELECOM/s T-Net functions.
7.1 “ R” Button on Private Exchanges
If you have connected your telephone to private exchanges, you can use all the facilities such as call
transfer, automatic recall, etc. The “ R” signal button gives you access to these facilities. The FLASH
time” 100ms” will be required on a private exchange (Adjustment, see 8.9). you can find out from the
dealer from whom the equipment was purchased whether your telephone will work on your private
exchange without any problems.
7.2 “ R” button and the DEUTSCHE TELECOM T-Net
Our telephone supports the most important DEUTSCHETELEKOM added value functions. The T-Net works
using the “ FLASH 300ms” setting.
Please contact DEUTSCHE TELEKOM to gain access to T-Net functions.
7.3 Using pause
With private exchanges, it is necessary to dial a certain number in order to obtain a dialing tone for an
outside line on the extension. With some, older private exchanges, it takes some time before the dialing
tone can be heard. Especially for these private exchanges, an automatic pause can be inserted after
connecting to the outside line so that you can dial directly without waiting for the dialing tone.
Entering a pause when dialing manually
Press the redial button once between the number for the outside line and the actual telephone
number. After connecting to an outside line your telephone will wait for 3 seconds before dialing the actual
telephone number.
The pause can also be saved with numbers in the phone book.
- 19 -