9.2 Connecting external calls to another handset
If you have accepted an external call on one handset, you can forward the external call to another handset.
To do this, press the
button and then the number of the required handset.
If there should be no reply from the handset called, you can take the call back with the
button.
After the internal call has been accepted at the other handset, you have the following options:
A.
Consultation/brokering: You can now speak to the internal subscriber and return to the
external caller by pressing the
button. You can switch between the external and the
internal call as many times as you like in this way.
B.
Forward the call: The external caller by pressing the
button on the first handset.
You can also forward the external call to a handset directly without consultation by dialing
the internal number using the
button and then pressing the call button
.
Note: The external call cannot be forwarded directly to another mobile unit. The external call can only be
forwarded when the internal call has been accepted at another mobile unit.
9.3 Setting up conference calls
You can connect a second internal handset with an external call to set up a three-way conference. To
connect two handsets with an external call:
Set up the desired connection with the external caller. Then press the
button followed by the number
of the handset being called. Once the second internal caller has answered, press the
button and all
three callers will be connected in a conference call.
Multiple handsets
9.4 Logging on and logging off handsets
9.4.1 Logging on handsets
1.
Press and hold the page button
on the base station for 3 seconds until you see
LED lights on
the base. Now log on the new handset to the base station within 90 seconds.
2.
Press the
button on the handsets.
3.
Select the REGISTERATION menu with
and
and confirm with
.
4.
Select the BASE 1 menu with
and
and confirm with
.
5.
Now enter the number of the base station (1-4) using the number pad. If the handset is already
connected to a base station, the corresponding numbers will flash.
6.
Confirm your entry with the
button. A search will now be carried out for the base station.
7.
After the base station has been found, you must enter the PIN code
(Factory setting is PIN code:0000)
8.
Confirm your entry with the
button and after a few seconds you will hear a signal tone. The
handset is now logged on and can be used for external and internal calls.
9.
An internal number will now have been allocated to the handset. The first handset registered (main
handset) has the internal number 1. Any further handsets that are registered are allocated internal
numbers (2 to 5) in the order of registration. This internal number is shown in the display on the right
side.
- 28 -
Содержание SE-DECT-V1
Страница 1: ...DECT Wireless PSTN VoIP 2 in 1 phone User manual...
Страница 34: ...3 4 34...
Страница 35: ...5 6 35...
