9.4.2
Logging on other DECT-GAP telephones to the base station
In order to log on a DECT-GAP handset, follow the instructions in the other supplier’ s operating manual
and then press the
button on the base station for 3 seconds. Use the PIN-code 0000 to log on.
Multiple handsets
9.4.3
Logging off handsets
A handset can only be logged off using another handset that is still logged-on. It is therefore not possible
to carry out the logging-off procedure using the handset that is to be logged off.
1.
Press the
button on the handset.
2.
Select the BS SETTINGS menu with
and
and confirm with
.
3.
Select the TERMINATE HS function with
and
and confirm with
.
4.
Now enter the PIN code of the base station (factory setting 0000) and confirm with the
button.
5.
Now select the internal number of the handset to be logged off and confirm with the
button. You
can abort the process by pressing the
button. If the logging-off is successful, after a few
seconds you will hear a signal tone. The handset is now logged off and can no longer be used for
external and internal calls.
9.5
Additional base stations
You can increase the range of the handsets by using several base stations. In order to make use of this
effect, all base stations must be connected to a telephone socket. Depending upon the application, you
can allocate the same telephone number to each base station or you can give the base stations different
numbers. Make sure that the ranges of all base stations overlap. Each handset must be logging on to each
base station. Please test the range of the handsets before putting a new base station into operation.
If a handset is logged on to the base station and if the automatic base station selection is activated, the
handset is always forwarded automatically to the nearest base station. Current calls cannot be transferred
from one base to another.
Multiple handsets
9.6 Selecting a base station
1.
Press the menu button
.
2.
Select the HS SETTINGS menu with
and
and confirm with
.
3.
Select the SELECT BASE menu with
and
and confirm with
4.
Select the BASE 1~4 with
and
and confirm with
.
The display will now show all base stations that the handset is already logged on to. The number of
the currently active base station will flash. Select the required base station to which the handset is
to be switched by means of the number pad.
5. Confirm with the
button.
- 29 -
Содержание SE-DECT-V1
Страница 1: ...DECT Wireless PSTN VoIP 2 in 1 phone User manual...
Страница 34: ...3 4 34...
Страница 35: ...5 6 35...
