Conditions
Please read the following messages to make sure whether your working envi-
ronment is suitable.
• Ensure there is enough space around the receiver for ventilation.
• The temperature should be kept between –20˚C and 50˚C (-4F – 122˚F).
The relative humidity should remain from 20% to 80%.
• Avoid putting the product in places where occur might change rapidly in
temperature or humidity
• Keep it dry, dustless and avoid exposure in it directly in sunlight
• Keep product away from heat sources such as electric heater
• Do not use the camera near aggressive chemicals
• Do not place product near any magnetic objects
Maintenance
It might influence the normal operation of the product if used at the fringe
range of normal temperature. Please turn off the power when not in use
Do not disassemble the product.
Do not shake or stricken the product.
Do not use this camera near water- for example, near a bath tub, wash bowl,
kitchen sink or laundry tub, in a wet basement or near a swimming pool; and
the like.
Please obey the local government’s environment protection policy
Warning:
• In order to avoid inflammation or electric shock, this machine should be kept
away from exposure to rain or moist, and it shall not be put in or near bath-
rooms, washing pools, washhouses, moist basements, or swimming pools.
• In use of sockets set on walls or extension wires, attention should be paid
not to exceed their load capabilities to avoid inflammation or electric shock;
• Casings are not allowed to open, otherwise the internal precision parts may
get damaged, or personal injury caused.
• Switch off the power supply in thunder and lightning or when not in use for
long periods of time.
• Do not attempt to service the product yourself as opening or removing cov-
ers may expose you to dangerous voltage or other hazards. Refer all serv-
icing to qualified service personnel.
4
