SecurityMan iCamDVR, Руководство пользователя

Страница: 40 / 83

Figure 58 - Speed Control
39 | SecurityMan
channel is not a PTZ camera, the control panels will not be
active (will be grayed-out) or controllable.
The
Speed
tab control allows speed selection for pan
speed, tilt speed, focus speed and zoom speed. Speed
ranges from 0 to 7 with 7 being the fastest speed level; the
default speed is 3 as shown in figure 58 below.
NoTICe
Short mouse click on manual Pan, Tilt, Focus, Zoom and Iris
controls will create short movements as longer press and hold
on the mouse click can create a longer movements and con-
trols in PTZ Control panel.
Focus and zoom speed may varies depending on the cam-
era protocols, as some protocols may not support focus
and zoom speed variation and therefore may be grayed-
out as illustrated above in figure 58. Below are more rela-
tive definitions of PTZ
Speed :
Pan Speed – control horizontal rotating speed. 1.
Tilt Speed – control vertical rotating speed. 2.
Focus Speed - control focus speed. 3.
Zoom Speed - control zoom in & zoom out speed. 4.
Click on the preset button and a pop-up
Preset
and
GRoUP
list will appear as illustrated below in figure 59.
There are a total of 16 preset positions for PTZ camera and
4 GROUP setting. Preset camera positions can be con-
figured to store any desired or specific location(s) for the
purpose of quick glance at a press of a button as needed.
An ideal preset location positions would be; door entrance,
cash register, busy aisle, hallway, and etc. GROUP is a se-
ries of preset camera positions joined together to become
a GROUP which then be used to auto dwell if GROUP were
to be selected or enabled. Selected Preset or GROUP will
have a check marked in front to resemble selection, see
PTZ Config below for Preset and GROUP setup.
Click on the Config button to access Preset and
GROUP configuration setting as illustrated in figure 60
below.