Security Tronix ST-PTZIR480-30X Скачать руководство пользователя страница 24

Страница: 24 / 27

V2.0 7-31-12

200 presets, 4 sequences, 4 scans or 4 patterns.

10. Press the

[OPEN]

key to save and exit. Press the

[CLOSE]

key to exit directly without saving.

INFORMATION DISPLAY CONFIGURATION

This menu sets whether or not various information is displayed within

the camera’s video output

and if so, the time duration of the display.

MAIN MENU DISPLAY CONFIGURATION



DOME TITLE



Procedure:

Call preset point 95 to enter the main menu.

Use the Up/Down cursor to choose

[DISPLAY CONFIGURATION]

and press

[OPEN]

confirm the selection. Under

[DISPLAY CONFIGURATION]

choose

[DOME TITLE]

and press

[OPEN]

to confirm the selection.

Up/down P/T to modify Camera Title Display time.

If OFF is chosen, the Dome Title will not be

displayed on the OSD. If ON is chosen, the title will always be displayed. If a time is chosen (in

seconds), the title will be displayed on the OSD for that amount of time, then it will stop being

displayed and not be displayed again until a PTZ command is received from a controller.

Press the

[OPEN]

key to save and exit. Press the

[CLOSE]

key to exit directly without saving.



Note:

Preset Title, Zoom Position, Direction Indicator and Environmental Indicators are all set

using the same method as Dome Title.



GLOBAL SETTING

All of the OSD data displays can be set simultaneously by choosing this option and pressing

[OPEN]

to engage the global setting to turn all data displays on or off.

Alarms setup

Alarm function setting menu.

MAIN MENU ALARMS SETUP

【SYSTEM SETTING】
【CAMERA PARAMETERS】
【PANTILT SETTING】
【DISPLAY CONFIGURATION】
【ALARMS SETUP】

→INPUT CHANNEL: 001

ALARM ACTION : DISARM
INPUT MODE : NO

ALARM LINKAGE:    OFF
RELAY OUTPUT :    OFF
RESET DELAY  :     30

【SYSTEM SETTING】
【CAMERA PARAMETERS】
【PANTILT SETTING】
【DISPLAY CONFIGURATION】
【ALARMS SETUP】

→DOME TITLE : ON

PRESETS TITLE : ON
ZOOM POSITION : ON

DIRECTION INDICATOR : ON
ENVIRONMENTAL INDICATORS : ON
GLOBAL SETTING

Содержание ST-PTZIR480-30X




























Результаты поиска

Содержание ST-PTZIR480-30X

Отзывы:

Похожие инструкции для ST-PTZIR480-30X

Бренды по названию

Популярные бренды

Security Tronix ST-PTZIR480-30X, Руководство по установке

Результаты поиска

Содержание ST-PTZIR480-30X

Отзывы:

Похожие инструкции для ST-PTZIR480-30X

Бренды по названию

Популярные бренды