V2.0 7-31-12
22
2.
Use the Up/Down cursor to choose
[PANTILT SETTING]
and press
[OPEN]
to confirm the
selection and enter pan set menu.
3.
Under
[PANTILT SETTING]
choose
[PATTERN SETUP]
and press
[OPEN]
to enter route
recording mode.
4.
Under
[PATTERN SETUP]
choose
[RECORD NEW PATTERN]
and press
[OPEN]
to enter
mode route recording setting.
5.
Press
[OPEN]
and pattern recording will begin immediately.
“Recording Mode Route” will be
shown on the screen. Operate the dome camera following the desired route. All movements at
this time are being recorded.
6.
To finish recording, press
[OPEN]
and the pattern recording will automatically be saved.
7.
Press the
[OPEN]
key to save and exit. Press the
[CLOSE]
key to exit directly without saving.
AUTOSCAN SETUP
a
)
This cameral supports auto scan. The camera will scan horizontally between user-defined left
and right points, with steady speed and zoom levels.
b
)
The machine will scan a 360° rotation if the left and right points are set to the same position.
PANTILT SETTING AUTOSCAN SETUP
Auto Scan Number
Procedure:
1.
Call preset point 95 to enter the main menu.
2.
Use the Up/Down cursor to choose
[PANTILT SETTING]
and press
[OPEN]
to confirm the
selection and enter pan set menu.
3.
Under
[PANTILT SETTING]
choose
[AUTOSCAN SETUP]
and press
[OPEN]
to confirm the
selection.
4.
Under
[AUTOSCAN SETUP]
press
[AUTOSCAN NUMBER]
and choose 1 of the 4 autoscan
routes to be edited. Use the Up/down P/T to choose a scan route.
5.
Press the
[OPEN]
key to save and exit. Press the
[CLOSE]
key to exit directly without saving.
SET LEFT LIMIT
Procedure:
1.
Under
[PANTILT SETTING]
choose
[SET LEFT LIMIT]
and press
[OPEN]
to prepare for
setting the left limit point.
2.
Operate the PTZ control to guide the camera to the location desired for the left limit point.
3.
Press
[OPEN]
when the scan left point has been set and the system will automatically record
the current position as the left edge for scanning.
4.
Press
[CLOSE]
to exit the left limit setting.
Note:
The scan left limit point can be set at any point on the horizontal axis.
The right edge setting utilizes the same method as the left point.
【PANTILT SETTING】
【PRESETS SETUP】
【SEQUENCE SETUP】
【PATTERN SETUP】
→【AUTOSCAN SETUP】
【HOME ACTION】
→AUTOSCAN NUMBER : 001
TITLE :SCAN1
SET LEFT LIMIT
SET RIGHT LIMIT
DEFAULT SPEED
RUN CONTINOUSELY
DELETE CURRENT