V2.0 7-31-12
18
and enter auto flip set.
4.
Use Up/down P/T to select and change this function to ON or OFF.
5.
Press the
[OPEN]
key to save and exit. Press the
[CLOSE]
key to exit directly without saving.
JOYSTICK RECOVER
NOTE: This model of camera does not support manual focus or iris adjustments. The
settings may be made for joystick recover, but they will have no effect as there is no
manual iris or focus settings to recover from.
ALL:
When ALL is selected, both the focus and iris will return to automatic operation after any
joystick command is received from the camera.
NONE:
When NONE is selected, the focus and iris will remain under manual control only. The
camera will not attempt to auto-focus the camera or operate the iris automatically.
FOCUS:
When FOCUS is selected, just the focus function will return to automatic mode when the
joystick is moved after a manual adjustment has been made. The iris will remain under manual
control.
IRIS:
When IRIS is selected, just the iris function will return to automatic mode when the joystick is
moved after a manual adjustment has been made. The focus will remain under manual control.
Procedure:
1.
Call preset point 95 to enter the main menu.
2.
Under
[PANTILT SETTING]
choose the
[PANTILT SETTING]
sub-menu, press
[OPEN]
to
confirm the selection and enter pan parameter set.
3.
Under
[PANTILT SETTING]
choose the
[JOYSTICK RECOVER]
menu and press
[OPEN]
to
confirm the selection.
4.
Up/down P/T to change the setting.
5.
Press the
[OPEN]
key to save and exit. Press the
[CLOSE]
key to exit directly without saving.
SPEED PROPORTIONAL
This function causes the speed at which the camera pans to decrease proportionately with the
amount of zoom applied; When the camera is zoomed out wide, it will pan at full speed. When the
camera is zoomed in far, the camera will pan slower.
Procedure:
1.
Call preset point 95 to enter the main menu.
2.
Under
[PANTILT SETTING]
choose the
[PANTILT SETTING]
sub-menu, press
[OPEN]
to
confirm the selection and enter pan parameter set.
3.
Under
[PANTILT SETTING]
choose the
[SPEED PROPORTIONAL]
menu and press
[OPEN]
to confirm the selection.
4.
Up/down P/T to change the setting.
5.
Press the
[OPEN]
key to save and exit. Press the
[CLOSE]
key to exit directly without saving.
INFRARED LIGHTING
The IR LEDs can either be turned on manually or set to turn on and off automatically as lighting
conditions change.
Procedure:
1.
Call preset point 95 to enter the main menu.
2.
Under
[PANTILT SETTING]
choose the
[PANTILT SETTING]
sub-menu, press
[OPEN]
to
confirm the selection and enter pan parameter set.
3.
Under
[PANTILT SETTING]
choose the
[INFRARED LIGHTING]
menu and press
[OPEN]
to
confirm the selection.
4.
Up/down P/T to change the setting.
5.
Press the
[OPEN]
key to save and exit. Press the
[CLOSE]
key to exit directly without saving.
