33
3.9.2.3 Press “
Left
” or “
Right
”: Select DWELL on the screen
3.9.2.4 Press “Up” or “Down”: Select ON/OFF on the screen
3.9.2.5 Press “MENU”: Confirm and exit the dwell setting
3.9.2.6 Press “MENU”: Exit the channel setup
3.9.3
(Brightness) /
(Contrast) /
(Color)
: video adjustment of each channel
3.9.3.1 Press “Up” or “Down”: Select channel in the Channel setup
3.9.3.2 Press “
ENTER”
Enter the channel setup
3.9.3.3 Press “
Left
” or “
Right
”: Select brightness/contrast/color on the screen
3.9.3.4 Press “Up” or “Down”: Set up
0~9
on the screen.
3.9.3.5 Press “
MENU
”: Confirm and exit the brightness/contrast/color setting.
3.9.3.6 Press “
MENU
”: Exit the channel setup
3.9.4 ALARM
3.9.4.1 Press “Up” or “Down”: Select channel in the Channel setup
3.9.4.2 Press “
ENTER”
to Enter the cannel setup
3.9.4.3 Press “
Left
” or “
Right
”: Select ALARM on the screen
3.9.4.4 Press “Up” or “Down”
:
Select LOW/OFF/HIGH for alarm polarity
3.9.4.5 Press “
MENU
”:” Confirm and exit the alarm setting.
3.9.4.6 Press “
MENU
”:” Exit the channel setup
3.9.5 RECORD
3.9.5.1 Press “Up” or “Down”: Select channel in the Channel setup
3.9.5.2 Press “
ENTER
”: Enter the Channel setup
3.9.5.3 Press ” “Left” or “Right”: Select Record on the screen.
3.9.5.4 Press “Up” or “Down”: Select record method as below (Unit will only record the channel
which has been set up for
EVENT
/
NORMAL
/
OFF
)
EVENT
: when an alarm input is triggered, unit will record alarming channel more
frequently. For example: normal record method is 1-2-3-4-5-……-16. In Event mode,
when CH01 is triggered, the record method will become 1-2-1-3-1-4-1-5-…-16.
NORMAL
: when external alarm is on, unit will record normally as set up.
OFF
: DMR will not record
3.9.5 Press “MENU”
:
Confirm and exit the record setting
3.9.6 Press “MENU”: Exit the channel setup
3.10
MOTION DETECTION setup