11
3.2 Front panel keypad
REC
SELECT
MENU
ENTER
ZOOM
SLOW
ALARM
HDD
Full
HDD
TIMER PLAY
REC
Down
Left
Right
POWER
16
7
2
4
6
1
5
3
8
10
12
14
9
11
13
15
Up
Please follow the instructions below for proper operation of this unit.
1. Install HDD
This device comes equipped with a removable hard disk drive tray. Before turning on this
device, you must install the hard disk drive (unless already included), and prepare it for
operation.
If two HDDs are to be set up, one should be selected as “Master” and the other should be
selected as “Slave”. Otherwise, please set the jumpers on both HDDs to Cable Select (CS).
2. MENU
:
Press
MENU
to enter
main menu operation mode, and enter administrator password
(default:0000) to access main menu.
3. ENTER
:
Press
ENTER
for confirmation.
4. ZOOM
:
Press the
ZOOM
button to enlarge the main monitor picture display.
5. :
Picture in Picture. Press PIP button to enter PIP display screen.
6. SLOW
: Press
SLOW
to slow down speed of play mode.
7. Select
: Press Select to choose the camera (1~16) to display in full screen mode.
8. :
4 channel display mode
9. :
7, 9, 10, and 13 channel display mode
10. :
16 channel display mode
11. LED Light:
Under the following conditions, the LED Light remains ON.
(1) HDD
:
HDD is activated
(2) HDD Full: HDD is full
