Security Camera King NVR-LT-128, Руководство пользователя

Страница: 81 / 106

75
Parameter Function
Network mode It includes multiple-address, fault tolerance and load balance.
Default card You need to select default network card if the network mode
is multiple-address.
Ethernet port You need to select Ethernet port here if the network mode is
multiple-address.
DHCP It is to auto search IP. When enable DHCP function, you can
not modify IP/Subnet mask /Gateway. These values are from
DHCP function. If you have not enabled DHCP function,
IP/Subnet mask/Gateway display as zero. You need to
disable DHCP function to view current IP information.
Besides, when PPPoE is operating, you can not modify.
IP Address Please input the corresponding number to input IP address.
Then you can set the corresponding subnet mask the default
gateway.
Default Gateway Here you can input the default gateway.
TCP Port Default value is 37777. You can change if necessary.
HTTP Port Default value is 80.
RTSP port Default value is 554.
UDP Port Default value is 37778. You can change if necessary.
Max Connection Network user max amount. The value ranges from 0 to 20.
O means there is no user can access current device.
Preferred DNS serv DNS server IP address.
Alternate DNS serveDNS server alternate address.
Transfer mode Here you can select the priority between fluency/video
qualities.
LAN download System can process the downloaded data first if you enable
this function. The download speed is 1.5X or 2.0X of the
normal speed.
Advanced setup
The remote host can choose multi-cast and PPPOE to set. See Figure 5-26.