15
CONTROL MODE
：
AUTO
3D NOISE MODE
：
HIGH
3D NOISE TNF
：
OFF
3D NOISE SNF
：
OFF
BACK EXIT
WDR MODE
：
OFF
DETECTION SENS
：
LOW
SHADOW CORRECTION
：
MID
BACK EXIT
o
HIGH LIGHT REDUCE: It is to reduce the abruptly strong video on the video in case it
affects the video quality. Please click the left/right button to set.
o
EXPOSURE RESTRAIN: It is to restrain the abrupt high light on the video in case it affects
the video quality. Please click the left/right button to set.
o
WDR SETTING: It is an abbreviation for wide dynamic region. Please make sure your
camera supports current function. This function can adjust the video brightness when the
contrast between the strong light and the dark light is too high. There is the fourth menu.
Please move the light to highlight current item and then click the OK button to go to the next
level menu.
o
AE RECOVERY: Manually click the “+” and “-“button on the PTZ interface, system cam
resume previous exposure value after specified time (The exposure value does not resume
if this function is off.).
z
BACK: Go back to previous menu.
z
EXIT: Log out system menu.
4.4.3.3
3D Noise Reduction
Move the cursor to 3D NOISE REUDCTION and then click confirm button, you can go to the submenu.
z
CONTROL MODE: It is to set 3D noise reduction mode. It includes: off/manual/auto and etc. Please
click the left/right button to set.
z
3D NOISE MODE: When the noise reduction mode is auto, you can set intensity. It includes:
low/high/default. Please click the left/right button to set.
z
3D NOISE TNF: This function is valid when you set the noise reduction mode as manual. Please use
the left/right button on the keyboard or in the speed dome terminal menu to set.
z
3D NOISE SNF: This function is valid when you set the noise reduction mode as manual. Please use
the left/right button on the keyboard or in the speed dome terminal menu to set.
z
BACK: Go back to previous menu.
z
EXIT: Log out system menu.
4.4.3.4
WDR
Move the cursor to WDR and then click confirm button, you can go to the submenu.
z
WDR MODE: It is to enable or disable WDR function. Please use the left/right button on the keyboard or
in the speed dome terminal menu to set.
z
DETECTION SENSISIVITY: It
is to set WDR detection sensitivity. Please use the left/right button on the
keyboard or in the speed dome terminal menu to set.
