6
3
Web Operation
This series speed dome product supports the Web access and management via PC.
Web includes several modules: live view, PTZ, setup, alarm, logout and etc.
Speed dome factory default setup:
z
IP
address:
192.168.1.108.
z
User name: admin
z
Password:
admin
3.1
Network Connection
Please follow the steps listed below for network connection.
z
Make sure the speed dome has connected to the network properly.
z
Speed dome IP address and PC IP address shall be in the same network segment. Speed dome default
IP address is 192.168.1.108. If there is router, please set the corresponding gateway and subnet mask.
z
Use order ping ***.***.***.***(* speed dome address) to check connection is OK or not.
3.2
Login and Logout
Open IE and input speed dome address in the address bar.
For example, if your speed dome IP is 192.168.1.108, then please input http:// 192.168.1.108 in IE address
bar. See Figure 3-1.
Figure 3-1
System pops up warning information to ask you whether install control webrec.cab
or not. Please click OK
button, system can automatically install the control. When system is upgrading, it can overwrite the previous
Web too.
If you can’t download the ActiveX file, please check whether you have installed the plug-in to disable the
control download. Or you can lower the IE security level. See Figure 3-2.
Input your IP
address here
