SecuRam Systems Inc. USA
Page 7
Press “▲” or “▼” to select the User ID No.
If ID No. 21 is selected, for example, the two users with TDO are: No.01 and
No.21.
Note: Even if No.21 is set with TDO, it will not be a Manager code and therefore will
not have access to Manager functions. ID No.01 and 02 are still Managers but ID
No. 02 will no longer have TDO capability.
IMPORTANT: If you select ID No.01, ID No.01 will be the only user with TDO.
Note
: The default IDs that have TDO capabilities are No.01 and No.02.
●
During Time Delay period, user can operate the entry pad, such as enrolling, deleting
etc., but the lock body will not be unlocked.
●
After the original time delay is successfully changed, the new time delay will not go into
effect until after unlocking once with an enrolled code with the original time delay.
●
When changing Time Delay, if the period is longer than the previous one, the new time
delay will be effective during the next unlocking.
11. Unlocking with an enrolled code (with Time Delay and Multiple Locks)
Enter an enrolled code. If the code is verified successfully, the LCD will show the ID No. of
the entered code, which is followed by:
Press “1” to unlock Door 1, “2” to unlock Door 2, “3” to unlock Door 3 or “4” to unlock Door
4.
Note:
The default authorized door is Door 1.
If the number of locks is set to “01”, after a code is verified successfully, the controller is
unlocked directly (if no time delay) or starts counting up without selecting a door.
After selecting a door, the entry pad will start counting up.
For example:
Time Delay is set to 10 minutes and Time Window is 5 minutes. Enter an enrolled code
(ID: 03). When the LCD shows:
The entry pad will start counting. The LCD screen flashes every 15 seconds. When Time
Delay is expired, the entry pad will start counting down for Time Window.
