ScanLogic B22
Operation Instructions
25
Step 4: Depress the reset button and hold it in its depressed position. While the reset button is
depressed, connect the cable to the lock.
Step 5: Continue to hold the reset button in its depressed position for another 5 seconds, then
release.
A communication signal has now been sent to the Lock body telling it to convert from analog to
digital mode. The ScanLogic will now be able to operate the lock body.
Q: How do you know if the lock has been reset?
•
The ScanLogic will not sound or beep when it resets. When a button is pressed, the LCD
will report “Link with Lock OK”. This indicates that the lock is now in digital mode and
has been successfully paired and the default codes will operate the lock. If the LCD
reports “Fail to Link with Lock”, repeat the reset process.
10.0 Shortcut Operations
10.1 Add User: “Menu/OK” + “1”
Step 1: Press the Menu/OK button
Step 2: Press the number "1" button, the screen prompts:
Step 3: The display will prompt you to login. Enter a valid Super or Manager Code and press
Menu/OK; or place an enrolled finger on the fingerprint scanner.
Step 4: The display will prompt you to enter the new code for the user:
Step 5: Repeat the user code
