Q7-B03
Q7-B03 User Manual - Rev. First Edition: 1.0 - Last Edition: 1.1 - Author: S.B. - Reviewed by G.G. Copyright © 2017 SECO S.r.l.
50
4.3.4.1
Console Redirection Settings submenu
Menu Item
Options
Description
Terminal Type
VT100
VT100+
VT-UTF8
ANSI
Emulation:
ANSI: Extended ASCII Char set.
VT100: ASCII Char set.
VT100+: extends VT100 to support colour, function keys, etc.
VT-UTF8: uses UTF8 encoding to map Unicode chars onto 1 or more bytes
Bits per second
9600 / 19200 / 38400 /
57600 / 115200
Select Serial port Transmission Speed. The speed must be matched on the other side. Long or noisy lines
may require lower speeds.
Data bits
7 / 8
Set Console Redirection data bits
Parity
None
Even
Odd
Mark
Space
A parity bit can be sent with the data bits to detect some transmission errors.
Even: parity bit is 0 if the number of 1s in the data bits is even.
Odd: parity bit is 0 if the number of 1s in the data bits is odd.
Mark: parity bit is always 1.
Space: parity bit is always 0. Mark and Space do not allow for error detection
Stop bits
1 / 2
Stop bits indicate the end of a serial data packet. (A start bit indicates the beginning). The standard setting
is 1 stop bit. Communication with slow devices may require more than 1 stop bit
Flow Control
None
Hardware RTS/CTS
Flow Control can prevent data loss from buffer overflow. When sending data, if the receiving buffers are full,
a 'stop' signal can be sent to stop the data flow. Once the buffers are empty, a 'start' signal can be sent to
re-start the flow. Hardware flow control uses RTS# / CTS# lines to send the start / stop signals.
VT-UTF8 Combo Key Support
Enabled / Disabled
Enable VT-UTF8 Combination Key Support for ANSI/VT100 terminals
Recorder Mode
Enabled / Disabled
When this mode is enabled, only text will be sent. This is to capture Terminal data.
Resolution 100x31
Enabled / Disabled
Enables or disables extended terminal resolution
Legacy OS Redirection Resolution
80x24 / 80x25
On Legacy OS, the number of Columns and Rows supported redirection
Putty Keypad
VT100 / Intel Linux /
XTERMR6 / SCO /
ESCN /VT400
Select FunctionKey and KeyPad on Putty
Redirection after BIOS POST
Always Enabled
BootLoader
When BootLoader is selected, then Legacy Console redirection is disabled before booting to Legacy OS.
When 'Always Enabled' is selected, then Legacy Console redirection is enabled for Legacy OS. Default
setting for this option is set to 'Always Enabled'
