2
7/8
” (73mm)
1
1/2
”
(38mm)
4
5/8
”
(117mm)
4
5/8
”
(117mm)
2
7/8
”
(73mm)
1
1/2
”
(38mm)
6
ENFORCER Access Control Keypad with Proximity Card Reader
SECO-LARM U.S.A., Inc.
Overview:
LED Indicators and Keypad Sounds:
Parts List:
1x Keypad
1x Back box
2x Installation screws
2x Mounting screws
1x Diode
1x Manual
Keypad Sounds and LEDs
Status
Sounds
(1)
Green/Red/Amber LED (Center)
In programming mode
–
Steady ON
Successful key entry
1 Beep
1 Flash
Successful code/card entry
2 Beeps
2 Flashes
Unsuccessful code/card entry
5 Beeps
5 Flashes
Power up delay
Continuous beeping
Continuous flashing
Output relay activation
(2)
1-Sec long beep
–
In standby mode
(3)
–
1 Flash/sec
System restore mode
2 Beeps
Fast flashing for 2.5 min
Card/code already stored
1 Long beep
–
Real-time clock stopped after
power loss
Continuous 3 fast beeps
every 5 seconds
–
NOTE
:
1.
Keypad sounds can be programmed ON or OFF (see page 25).
2. Output relay activation sounds can be programmed for 1-sec long beep, 2 short beeps, or OFF
(see page 25).
3.
Green center LED flashing during standby mode can be programmed ON or OFF
(see page 26).
LED Indicators
Red LED (Left)
Green/Red/Amber LED (Center)
Green LED (Right)
Steady
Available for free connection
Programming mode (green)
Output #1 inhibited (red)
Available for free connection
Flashing
–
Standby mode (green)
Inhibit mode paused (red/amber)
Keypad Locked (red/amber)
–
