Sebury B6-EH Plus, Руководство пользователя

Страница: 5 / 35

B6 Plus Series Standalone Access Controller User Manual V1.0
Sebury Technology Co., Ltd
http://www.sebury.com.cn
第
5
页
1.4 Technical parameters

Working Voltage: AC/DC10-28V

Standby current: ≤35mA(Input DC12V)

Operating current: ≤100mA(Input DC12V)

Working temperature: -40
～
60
℃

Working humidity: 0
～
95%

Lock signal relay contact current: ≤1A

Alarm (or doorbell) signal MOS tube output current: ≤1A

Distance of reading EM card:≤5cm

Distance of reading HID card:≤5cm

Distance of reading IC card:≤5cm
1.5 Applicable models
This user manual applies to the following models:
Thumbnails Product name Product model Card type Keypad Lead wire
Single-door Standalone Access
Controller
B6-EH Plus EM/HID Infrared 12
B6-IC Plus IC/CPU Infrared 12
Single-door Standalone Access
Controller B6K-EH Plus EM/HID Own 12
B6K-IC Plus IC/CPU Own 12
Double-doors Standalone Access
Controller
B6K2-EH Plus EM/HID Own 16
B6K2-IC Plus IC/CPU Own 16
2 Installation, wiring and debugging
2.1 Installation
With the special anti-demolition screw-driver remove the anti-demolition screw at the bottom of the device. Take off the
bottom case, and contrast the opening position of the bottom case and use the impact drilling to open the corresponding
hole on the wall. It includes an outlet hole with a diameter greater than 8mm and four plastic screw holes with a diameter of
6mm. Then insert four matching plastic expansion screws, fix the bottom case on the wall with four matching self-tapping
screws.