Sebury B6-EH Plus, Руководство пользователя

Страница: 34 / 35

B6 Plus Series Standalone Access Controller User Manual V1.0
Sebury Technology Co., Ltd
http://www.sebury.com.cn
第
34
页
Way to enter menu : * (Hold down for more than 2 seconds), (Admin password) #
Menu Parameter or operation step Function Default value
2# Double-doors mode
3# Interlock mode
9# Demo mode
09 0000#
Restore default settings, admin password and user
information unchanged.
32
0# Set lock to Delay mode
0 1# Set lock to Switch mode
2# Set the lock to Normal-open mode
34
0# Set Open-time to 50mS
2
(1-999)# Set Open-time from 1 to 999S
51
1,1,…,# Decrease the brightness of the normally bright red indicator
18
2,2,…,# Increase the brightness of the normally bright red indicator
52
0# Key backlit is always off
1 1# Key backlit is always on
(2-99)# After delay 2-99 seconds, Key backlit turn to micro light
53
1,1,…,# Decrease the brightness of the backlit
14
2,2,…,# Increase the brightness of the backlit
55
1,1,…,# Decrease the keypad tone
10
2,2,…,# Increase the keypad tone
6 Precautions in use

Lead line cannot be connected wrong, especially the power line, otherwise the machine may be burned or not work
properly.

Because the machine internal relay is used for signal output, cannot directly drive large power load, in order to ensure
the long-term stable operation of the machine, the electric lock be not connected directly with NO, NC, COM of the
machine, but driven by an access control special power supply.

When you enter the management mode or change the user PIN, you must press and hold the * key for more than two
seconds to be valid.

Is for the sake of safety, the default admin initial password 888888 only support the menu 00, which forced users to
change the 6-digit admin password, or cannot access other settings.

The factory default mode is the single-door mode. If you need other mode functions, you must enter the appropriate
mode to operate properly. In different modes, the management menu is also different.