background image

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USING THIS MACHINE

3

1. Do not leave vacuum while plugged in. Unplug from  

outlet when not in use and before servicing. 

 
2. Do not use outdoors or on wet surfaces. 

 
3. Do not use near small children or pets. Do not allow to be  

used as a toy. Use of this product by children should  
always be supervised by an adult. 

 
4. Use only as described in this manual. Use only  

manufacturer-recommended attachments. 

 
5. Do not use with a damaged cord or plug. If vacuum is not  

working as it should, has been dropped, damaged, left  
outdoors, or dropped into water, take it to a SEBO service  
center. 

 
6. Do not pull or carry by cord, use cord as a handle, close a  

door on cord, or pull cord around sharp edges or corners.  
Do not run vacuum over cord. Keep cord away from heated  
surfaces. 

 
7. Do not unplug by pulling on cord. To unplug, grasp the  

plug – not the cord. 

 
8. Do not use outlets above counters to plug in vacuum – 

damage to items in the surrounding area could occur. 

 
9. Always carry the vacuum over steps and sills. 

 
10. Do not handle plug or vacuum handle with wet hands. 

 
11. Do not put any object into vacuum openings. Do not use 

machine with any openings blocked. Keep openings free  
of lint, hair, and anything that may reduce air flow. 

 
12. Do not re-use filter bags or wash the filters. 

 
13. Do not remove any screws from vacuum. 

 
14. Do not vacuum up anything that is burning or smoking,  

such as cigarettes, matches, or hot ashes. 

 
15. Do not use vacuum without filter bag and/or filters in place. 

 
16. Turn off all machine controls before unplugging. 

 
17. Use extra care when cleaning on stairs. 

 
18. Do not use machine to vacuum up flammable or  

combustible liquids such as gasoline or use in areas  
where they may be present. 

 

19. Machines can cause a fire when operated near flammable  

vapors or materials. Do not operate this vacuum near  
flammable fluids, dust or vapors. 

 
20. Maintenance and repairs must be done by authorized 

personnel. 

 
21. Use only original SEBO replacement parts. 

 
22. Do not use vacuum as a step. 

 
23. If vacuum is used on plush carpet or carpet with thick 

padding, do not leave machine standing in one place with  
machine turned on. 

 
24. While the vacuum is in use, the power cord should be  

unwound from the cable reel at least two thirds of its length.  
Hold plug when rewinding onto the cord reel. Do not allow  
plug to whip while rewinding. 

 
25. Keep hair, loose clothing, fingers, and all parts of body away  

from vacuum openings and moving parts. Do not place  
fingers or other body parts under vacuum unless it is  
unplugged. 

 
26. Do not place the power head over rug or carpet edges. 

 
27. The vacuum has a manual reset thermal protector. The  

protector is reset by switching off the vacuum. The thermal  
protector needs some time to cool down after switching off!  
Check the vacuum for air blockages or mechanical failures  
before switching on. 

 
28. Store the vacuum in a dry place at room temperature. When  

the vacuum is not in use, you should rewind the cord onto  
the cord reel 

 
29. The K3 hose contains electrical wires. Do not use if  

damaged, cut, or punctured. Avoid picking up sharp objects. 

 
30. Always unplug vacuum before connecting or disconnecting  

either hose or power head. 

 
31. Use a SEBO power head only in combination with a SEBO  

vacuum cleaner. 

 
32. Do not connect power head to a malfunctioning or damaged  

vacuum.

When using an electrical appliance, basic precautions must always be followed. 

To reduce the risk of electric shock, this vacuum cleaner has a polarized plug; one blade is wider than 

the other. This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the 
plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not change the plug in any 
way. Connect only to the outlet type specified on the serial number plate underneath the machine.

 

SAVE THESE INSTRUCTIONS. 

 

 

WARNING:

 

To reduce the risk of fire, electric shock, or injury:

!

Содержание AIRBELT K

















Отзывы: