sebaKMT Sebalog D-3, Руководство пользователя

Страница: 46 / 89

SebaDataView-3 software
46
7.6.2 Saving access data for FTP server and email account
Various devices in the Sebalog series are equipped with an integrated GSM modem.
This means that they can
•
send messages per SMS or email (e.g. alarm messages), as well as
•
upload measurement data to an FTP server.
Every time the devices are programmed the access data for the sending email account
or the access data for the FTP server being used must be entered.
If you wish you can save the data for an email account as well as the FTP server data
permanently in the software. When programming the saved access data can then simply
be accepted into the input screen ‘with a click of the mouse’.
To store access data in the software, proceed as follows:
Step Description
1
In system settings open the
FTP
tab.
Result: The following entry screen then appears in the window:
The
FTP Settings
segment contains boxes for entering access data for your FTP
server. You can ask your company's system administrator or the server operator
for this data or it is available in your FTP usage agreement.
The Email Settings segment contains boxes for entering the access data for the
sender email account, if messages are to be sent per email. The data will be
assigned to you by the operator of the mail account, or by your system
administrator. In the
Sender name
field, you can enter any name, which will
subsequently be used to identify the device which is the sender of the alarm
message.
2 Click the relevant Use own settings checkbox.
3 Enter the access data in the input fields.
4 Click on OK to confirm the details and to close the window.
Result:
The access data are now permanently stored in the software. When
programming the devices a checkbox is shown for each of the steps in the entry
area, with which the stored access data can then be inserted.
Only when the Use own settings checkbox has been activated will it be possible
at a later stage to access the stored data for programming purposes.
If the checkbox has not been activated, the user is then offered a choice of using
a SebaKMT demo FTP server and/or a demo email account.
Introduction
Procedure