PrimeTest 350
Operating Instructions
- 48 -
Press
OK
(F4) to accept the new user name.
This new user will have no password set as default. If a
password is required see
section 10.4 – Change
Password
. Press
OK
(F4) to finish.
Note
:
If a User has been set up along with a
password this password must be entered in
the Password field of the Change User
screen. The unit will not allow this User to be
selected if the password is incorrect.
As the active User has been change from Admin,
access to the configuration menus has been removed.
When logged in as any other
User
access is restricted,
as can be seen below, where the unavailable
configuration options have a line through them.
This feature allows an administrator to configure the
instrument and then prevent other users from making
modifications.
Note:
Access for other Users is only restricted after
a password has been set for the Admin User.
If Admin password is blank, all Users have
full system access.
