Seat ALTEA XL, Руководство пользователя

Страница: 58 / 297

Cockpit 57
Safety First Operating instructions Practical tips Technical Data
display
4)
. Stop the car and switch off the engine. Check the coolant level
⇒
page 220
⇒
.
Even if the coolant level is correct do not continue driving . You should obtain
technical assistance.
WARNING
When working in the engine compartment, always observe the safety warn-
ings
⇒
page 213.
Caution
Accessories in front of the air inlet reduce the cooling effect of the coolant. At
high outside temperatures and high engine loads, there is a risk of the
engine overheating.
Rev counter
The rev. counter displays the engine speed in revolutions per
minute.
The start of the red zone
⇒
page 55, fig. 33 indicates the maximum
engine speed operating at service temperature. However, it is advisable to
change up a into a higher gear, move the selector lever to D or lift your foot
off the accelerator before the needle reaches the red zone.
Caution
The rev counter needle must never enter the red zone on the scale. Risk of
engine damage.
For the sake of the environment
Changing up into higher gears early will help you to save fuel and minimise
engine noise.
Speedometer
The speedometer is equipped with a digital odometer and a trip counter, in
addition to a service intervals display.
During the running-in period, the instructions shown on
⇒
page 190 should
be followed.
Setting the digital clock*
The digital clock is located in the instrument panel display.
– Turn the setting knob
⇒
page 55, fig. 33 clockwise until the
first “click” to set the hour. The hour will flash. To change the
hour, press the button.
– Turn the setting knob clockwise to the second “click” to set the
minutes. The minutes will flash. To change the minutes, press the
button.
4)
Depending on the model version
A
4
A
5
AlteaXL_EN.book Seite 57 Montag, 2. Februar 2009 12:26 12