Seat ALTEA XL, Руководство пользователя

Страница: 243 / 297

If and when 242
Wheel covers*
The wheel covers must be removed for access to the wheel
bolts
Removing
– Remove the wheel cover using the wire hook.
– Hook this into one of the cut-outs of the wheel cover.
Fitting
– Fit the wheel cover onto the wheel rim by pressing it firmly. Put
pressure initially on the point of the cut-out for the valve. Then
press the wheel cover onto the steel rim so that it engages all
round.
Loosening the wheel bolts
The wheel bolts must be loosened before raising the vehicle.
Loosening
– Fit the
box spanner
as far as it will go over the wheel bolt.
– Grasp the box spanner by the end turn it about one full turn to the
left
⇒
fig. 172 .
Tightening
– Fit the box spanner as far as it will go over the wheel bolt.
– Grasp the box spanner close to the end and turn the bolt to the
right until it is secured.
– An adapter is required to unscrew or tighten the anti-theft wheel
bolts.
Fig. 172 Changing the
wheel: loosen the wheel
bolts
AlteaXL_EN.book Seite 242 Montag, 2. Februar 2009 12:26 12