Seat ALTEA XL, Руководство пользователя

Страница: 226 / 297

Checking and refilling levels 225
Safety First Operating instructions Practical tips Technical Data
Changing the rear wiper blade
A good rear wiper blade is essential for clear rear vision.
Damaged wiper blades should be replaced immediately.
Removing the wiper blade
– Lift the wiper arm away from the glass
⇒
page 225, fig. 165 .
– Slide the blade adapter in the direction of the arrow and remove
the blade
⇒
page 225, fig. 165 .
Fitting the wiper blade
– With one hand, hold the top end of the wiper arm.
– Place the blade as shown in the
⇒
page 225, fig. 166 and slide
the adapter along until it fits into place.
Check the condition of the wiper blade regularly. Change as required.
If the windscreen wiper scrapes , it should be replaced if damaged, or cleaned
if soiled.
If this is not sufficient, refer to a qualified workshop.
WARNING
Do not drive unless you have good visibility through all windows!
•
Clean the windscreen wiper blades and all windows regularly.
•
The wiper blades should be changed once or twice a year.
Caution
•
A damaged or dirty window wiper could scratch the rear window.
•
Never use fuel, nail varnish remover, paint thinner or similar products to
clean the window.
•
Never move the windscreen wiper by hand. This could cause damage.
Fig. 165 Remove rear
window wiper blade
Fig. 166 Mount rear
window wiper blade
AlteaXL_EN.book Seite 225 Montag, 2. Februar 2009 12:26 12