Sealite SL-C510-AIS Скачать руководство пользователя страница 43

Страница: 43 / 80

SL-C510-AIS

Compact 5-9NM Solar Marine Lantern

Latest products and information available at

www.sealite.com

Application layout

The basic layout of the proAtoN application is illustrated in the following figure:

COM Port Selection

When connected via USB the COM port associated with the transceiver will be listed in the selection

drop down. To connect to the transceiver select the ‘AIS AtoN Port’ option from the drop down and

click the ‘Connect’ button.

Read / Write Configuration

Clicking the left hand button will transfer current configuration information from the transceiver to

proAtoN. Clicking the right hand button will configure the transceiver with the information currently

displayed in proAtoN. It is possible to select transfer of configuration information relating only to the

currently selected tab, or to all tabs by clicking the drop down arrow to the right of each button. The

default operation for each button is to read or write data relating to the selected tab only. It is highly

recommended that prior to deploying the AtoN the “Send all Configuration” option is used on the write
button.

Configuration Tabs

The configuration and status of the transceiver is displayed through a number of tabs:

• Real AtoN tab

Configuration of AtoN MMSI, name, type, dimensions, position and radio parameters.

• Message schedule tab

Configuration of FATDMA or RATDMA message schedules.

• Virtual AtoN tab

Configuration of virtual and/or synthetic AtoN transmissions.

• Status input tab

Configuration of the source for AtoN status information

Содержание SL-C510-AIS

















































































Результаты поиска

Содержание SL-C510-AIS

Отзывы:

Бренды по названию

Популярные бренды

Sealite SL-C510-AIS, Инструкция по установке и обслуживанию

Результаты поиска

Содержание SL-C510-AIS

Отзывы:

Бренды по названию

Популярные бренды