Latest products and information available at www.sealite.com
16
SL-75
3–5NM+ Solar Marine Lantern
I
I
1
T/C
T/C
B
R
B
T/C
T/C
Flash Code
This key sets the
fl
ash code on the light.
Example Key sequence:
This sets the
fl
ash code to value 123. The light responds by
fl
ashing the
fl
ash code value.
Flash Code Numbers
The lamp
fl
ashes numbers as follows: Hundreds, Tens, Ones. A value of 125 will be
fl
ashed as: 1
fl
ash,
followed by a delay, 2
fl
ashes, followed by a delay, 5
fl
ashes.
The
fl
ash for number 0 is one long
fl
ash.
For example if the current Flash Code is set to 51 via the AB switches, the lamp will
fl
ash number 081.
For a
fl
ash code set to 01, the lamp will
fl
ash 001.
FC
3
1
2
FC
T/C
T/C
Intensity
This function sets the light intensity. Valid intensity values are 1 for 25%, 2 for 50%, 3 for 75% and
4 for 100%.
Example Key sequence:
This sets the light intensity to 25%.
Battery Status
This function reads the battery status. The response from the light is High Voltage: 4
fl
ashes,
Good Voltage: 3
fl
ashes, Low Voltage 2
fl
ashes, Cutoff Voltage or below: 1
fl
ash.
Example Key sequence:
