by
wireless remote
LED puck light set
WHITE
Remote control uses
lithium button cell (included)
On switch
Touch each puck light
to turn it on and off
5 min timer
30 min timer
Off switch
Weaker brightness
Stronger brightness
ON
5
min
30
min
OFF
Fully rechargeable
via micro USB
Led indicator Red (Charging)
Led indicator Green (Full battery)
For optimale usage of the puck lights
The White Series NiMh rechargeable
batteries are recommended
(not included)
©2016 The Investment Company Europe B.V., Shift, The White Series,
and The White Series by Shift are
trademarks and/or registered trademarks of
The Investment Company Europe B.V. All rights reserved.
Distributed by The Investment Company Europe B.V.
The artwork and design of this manual are protected
by EU copyright law and may not be reproduced, distributed,
displayed, published or used for any purpose
without proper written permission. It is not permitted to alter, remove or reproduce any
trademarks or copyright notice from this manual.
Printed in China
CONGRATULATIONS
with your White Series by Shift
wireless remote LED puck light set. The LED Puck light
set is ideal as an environmentally friendly lighting
solution for kitchen cabinets, bookcases, closets,
workstations, home entertainment centers, and other
places where extra light is required.
BATTERIES INSTALLATION
For LED puck light: Turn the back top cover of the light in counter
clockwise direction and insert 3 “AAA” size batteries. See the
diagram for polarity.
USAGE INSTRUCTION
Puck lights can be turned on with the remote or by manually
switching on.
With remote:
1. Press the “ON” button on remote control to turn LED lights on
2. Press the “OFF” button on remote control, LED lights off
3. Press the “HIGH / LOW” button on remote control for
stonger/weaker brightness
and energy saving mode
4. Press the “5 min” button on remote control for 5 minutes
timer function.
5. Press the “30min” button on remote control for 30 minutes
timer function.
Manually:
Push lens of the puck light to turn it on, push it again to turn it off.
SELECTING A LOCATION FOR LED PUCK LIGHT
Place LED lights where desired using provided adhesive backing
3M stickers. Determine your location for the remote switch. Please
note that the switch must be within a 7.5m range of LED light(s) in
order to perform properly.
BATTERY WARNING:
- Do not mix old and new batteries.
- Do not mix alkaline, standard (carton-zinc), or rechargeable
(nickel-cadmium) batteries.
- Insert batteries using the correct polarity. Do not short-circuit
the supply terminal.
- Remove batteries when not in use. Recycle or dispose of
exhausted batteries according to local laws. Do not dispose of
batteries in a fire – they may leak or explode.
KEEP THIS INSTRUCTION MANUAL FOR REFERENCE AS IT
CONTAINS IMPORTANT INFORMATION.
