We’re here to help
866-558-5706
Hrs: M-F 9am to 5pm EST
IS-49679LED-US
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions:
1)
This device may not cause harmful interference, and
2)
This device must accept any interference received, including
interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of
the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for
help.
FCC Information:
2) Turning the light ON/OFF
•
Tap the power button
[C]
to turn the light on. The light will
come on and the switch itself will also illuminate green.
•
Tap the power button again to turn the light off. The
light will turn off and the green switch will no longer be
illuminated.
3) Dimming the lantern
•
The lantern defaults to 50% light output when first turned
on.
• To adjust the light output, press and hold the power
button. This will begin to dim the light to its lowest
position. Release the button when the desired light output
is reached; otherwise the lantern will continue to its lowest
light output.
•
After the lantern has reached its lowest light output,
release then hold the power button again to increase light
output.
•
Continue to hold the power button to get to the highest
output level or release the button when the desired light
output is reached.
4)
Pairing and connecting a BLUETOOTH phone/tablet
•
Press and hold the Bluetooth button
[D]
until a tone is
heard. The button will flash blue signaling it is ready to pair.
•
Turn on the Bluetooth function on your phone/tablet.
•
Using the Bluetooth settings of your phone/tablet, select
“Kichler” from the list of available connections.
•
The Bluetooth indicator light
[D]
on the lantern will change
to solid blue when the connection is successful and
another tone will sound.
•
To play music on your lantern, ensure volume on your
phone/tablet is NOT set to mute.
• To adjust the listening volume, use the volume controls on
your phone/tablet.
5)
Listening to music
•
After your phone/tablet has paired with the lantern, it will
connect automatically. If the lantern does not connect
automatically, repeat the pairing process to register your
phone/tablet.
• The audio source (phone/tablet) will control the volume,
pause, play, and advance tracks.
NOTE: If sound is NOT audible, ensure your phone/tablet is
not muted and make sure the volume is at an appropriate
level.
6)
Turning off the lantern’s Bluetooth audio
•
To turn off the lantern’s Bluetooth audio function, hold the
Bluetooth button
[D]
until a tone is heard and the blue light
on the Blue tooth button is no longer lit.
7)
How to switch audio source (changing between a different
phone/tablet)
•
Repeat pairing instructions (see section titled Pairing and
connecting a BLUETOOTH phone/tablet) on second phone/
tablet.
•
If primary phone/tablet is already connected, press and
hold Bluetooth button until blue light flashes. Ensure
primary phone/tablet is disconnected.
•
Select lantern (titled Kichler) on second phone/tablet.
8)
Product Specifications:
•
Charging parameters: 50 to 113°F (10 to 45°C)
•
Operating/storage temperature: -4 to 140°F (-20 to 60°C)
9)
Glass Replacement
•
Unscrew top lid screws
[E]
•
Remove lid
[F]
.
•
Unscrew screws
[G]
securing retaining clip
[H]
one at a time.
•
Remove retaining clip
[H]
.
• Push Glass
[I]
inwards from the outside of the lantern and
pull upwards.
•
Remove Glass
[I]
.
•
Replace Glass
[I]
.
• Secure retaining clips
[H]
back on with the screws
[G]
.
•
Reattach the lid
[F]
with the top lid screws
[E]
.
CAUTION – DO NOT INCINERATE
This product contains Lithium Ion Batteries that must be
disposed of following any State or Local code regulations for
proper disposal.
WARNING:
This fixture is intended for installation in accordance with the
National Electrical Code (NEC) and all local code specifications.
If you are not familiar with code requirements, installation by
a certified electrician is recommended.
Fixture Diagram
Parts List
Cautions
Installation Instructions
[A]
Charging Port
[B]
Red Indicator
Light
[C]
Power Button
[D]
Bluetooth
Button /
Indicator Light
[E]
Lid Screws
[F]
Lid
[G]
Screw
[H]
Retaining Clip
[I]
Glass
1)
Charging the lantern
For best results, completely charge the lantern prior to use.
• To charge the lantern, plug the charger into the wall.
•
Attach the other end of the charger into the charging
port
[A]
on the bottom of the lantern.
• A red indicator light
[B]
will illuminate to illustrate the
lantern is charging. Once the battery is completely charged,
this light will become green.
NOTE: The lantern can still operate as a light and/or
speaker while it is being charged.
Installation Instructions (continued)
A
B
F
E
I
C
D
TOP VIEW
H
G
