Appleton • 1.800.621.1506 • www.appletonelec.com
650483-000 Rev. B 07/15 • Page 1 of 10
650483-000 INSTRUCTION SHEET
Installation Instructions for N2LED Series Emergency Luminaire
Product Safety
FOR PROPER AND SAFE INSTALLATION OF THIS PRODUCT, PLEASE READ THE FOLLOWING INSTRUCTIONS.
Signal Words Defined
DANGER
indicates a hazardous situation which, if not avoided, will result in death or serious injury.
WARNING
indicates a hazardous
situation which, if not avoided, could result in death or serious injury.
CAUTION
indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.
NOTICE
is used to address practices not related to physical injury.
Safety Instructions
!
WARNING:
• Before installation, ensure that the unit complies with the hazardous area classification. Failure to do so may result in bodily injury
and/or property damage. Refer to the fixture nameplate for suitability in specific hazardous locations.
• To prevent ignition of hazardous atmospheres, the area must be free of hazardous vapors before opening the enclosure or servicing
the fixture. To reduce the possibility of static sparking, do not attach metallic parts to the outside of the unit (e.g. metallic screws,
tags, decals, etc).
• Do not mount the unit near gas or electric heaters.
• De-energize the unit before opening.
• To reduce the risk of electric shock, disconnect AC power before servicing. To prevent arcing, avoid shorting the battery terminals.
!
CAUTION:
• Servicing of this equipment should be performed by qualified service personnel.
• Do not attempt to service the battery. The unit uses a sealed, NiCD battery which requires no maintenance. For replacement,
contact the factory.
!
NOTICE:
• Do not use this equipment for anything other than its intended use.
• The use of accessory equipment is not recommended and may cause an unsafe condition.
• Wiring and installation should be performed in accordance with the National Electrical Code® (NEC®) and other applicable
local code requirements.
Agency Ratings
• Class
I
, Division 2, Groups A, B, C, D
• Class
I
, Zone 2, Group
II
C
• Type 4X
• IP66
• Marine Outside Type (Salt Water)
