fig.2
6. MAINTENANCE
6.1. REPLACING THE BATTERY PACK.
6.1.1. Remove the six screws at the back of the unit.
6.1.2. Lift off the rear cover.
6.1.3. Disconnect the black wire from the NEGATIVE (-) terminal of the battery, then disconnect the red wire from the POSITIVE (+) terminal of
the battery.
6.1.4. Remove the unserviceable battery from the unit.
6.1.5. Replace battery and connect the red wire to the POSITIVE (+) terminal, then connect the black wire to the NEGATIVE (-) terminal.
6.1.6. Replace the rear cover and secure with the six screws.
NOTE:
Use genuine parts only. Non authorised parts may be dangerous and will invalidate the warranty
.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT:
No liability is accepted for incorrect use of this product.
WARRANTY:
Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION:
For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
01284 757500
01284 703534
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park
,
Bury St. Edmunds, Suffolk,
IP32 7AR
www.sealey.co.uk
Environmental Protection
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be
sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment.
When the product becomes completely unserviceable and requires disposal, drain off any fluids (if applicable)
into approved containers and dispose of the product and the fluids according to local regulations.
WEEE Regulations
Dispose of this product at the end of its working life in compliance with the EU Directive on
Waste Electrical and Electronic Equipment (WEEE). When the product is no longer required, it must be disposed
of in an environmentally protective way. Contact your local solid waste authority for recycling information.
Battery Removal
Under the Waste Batteries and Accumulators Regulations 2009, Jack Sealey Ltd are required to inform potential
purchasers of products containing batteries (as defined within these regulations), that they are registered with Valpak’s
registered compliance scheme. Jack Sealey Ltd’s Batteries Producer Registration Number (BPRN) is BPRN00705.
VS2071.V2 Issue No: 1 - 23/10/14
Original Language Version
© Jack Sealey Limited
