Sealed Air TASKI swingo XP-M, Техническое руководство

Страница: 66 / 137

GTS Technical Manual
28. November 2014 Edition: V1.00/2014 5-43
Copyright © 2014, Diversey Care
05.
64.
19
to
ol
lo
we
rin
g u
ni
t - b
rus
h
un
it li
ne
ar
dr
iv
e -
X
P_
M
_V
1.
00
.fm
5.8 Tool lowering unit
5.8.3 Removing of brush unit linear drive XP-M
Picture 58: Brush unit linear drive XP-M
Lower the brush unit before you start to disassemble. As soon as the
brush unit touches the floor, press the emergency stop.
• Open tank set (03/104) by releasing locking screw (12/119).
• Remove the eight screws (09/110) for both brush housings (09/
111) and (09/128).
• Remove the two screws (09/112), wheels (09/113), bush (09/
155) and washers (09/109).
• Remove the two brush housings.
• Disconnect the plug of the brush unit linear drive (08/124) at the
top of the chassis (04/110) and thread out the cable.
• Remove the two circlips (08/130) from the upper and lower bolt
(08/131) of the brush unit linear drive (08/124).
• Remove the two bolts.
• Carefully weave out brush unit linear drive.