9
INSTRUCTIONS FOR CONTROL PANEL
The operators control panel has been designed with your convenience in mind. It's multi channel programs
allow you to customize settings for heat and speed according to your specifications. This can add greatly
to the repeatability & performance of the EP42 when used regularly with certain film combinations.
Please refer to the following instructions on how to use the EP42 Control Panel. This information will allow
you to successfully monitor the machine status, as well as set specific parameters for time and
temperature in one of 3 program channels for Cold operations and 9 program channels for Hot
applications.
Initially, when turned on, the LCD
Panel will display the last
condition it was in before being
turned off.
Is displayed when the Preset
Temperature has been reached.
A "blinking" WAIT will display
until the machine has reached
the Preset Temperature
Indicates the machine is in the
Energy Saving Mode
Upper/Lower Temperature
Indicates the Preset Temperature
Status
Speed
Indicates speed selected for
selected program. The EP42 has
a speed range from 2.6ft/min to
over 13ft/min.
Program
Indicates which program channel
is currently being used. There
are 4 different channels
available for the "cold" process
and 9 for "hot"
B U T T O N
L C D D I S P L Y
1. LCD WINDOW
