13
*** SETTING & USING THE CHANNEL MEMORY con’t***
Checking Temperature Of Hot Rollers
T-CHECK
1. Press the button, the present
temperature will be shown on the display.
*
Note: the display will blink 5 times and
return to the normal working condition
Using The Cold Mode
T-
CHEC
K
*
Use this mode for Pressure Sensitive
decaling or lamination
1. Press the button on the key pad
once, so that "Cold" displays in the window
C/HOT
2. Speed can be varied from 1 to 4 on programs
1 & 2 and from 1 to 9 on program 3 by
pressing the function and then
either the or arrow.
SPEED
3. Once you reach the desired speed release
the button, the display will blink several times
and then stop. You may now proceed with
your job.
4. If desired, the temperature on the upper heated
roller may be adjusted on programs 2 & 3. Both
the upper & lower temp can be adjusted on
program 3 only.
Note: It is normal for the buzzer to
sound when pressing key pad
repeatedly. If there is no sound or you
can not effect the display by pressing
the key pad, check to ensure the
Emergency Stops are not activated.
5. Return to the Hot Mode by pressing the
.
C/HOT
Note: Standby mode is not available in
Cold Mode.
