3
ABOUT THIS MANUAL
Thank you for purchasing SEAL branded products. Your new SEAL EP42 has been designed
and manufactured to provide years of continuous service. To insure high quality results,
please read this instruction manual thoroughly. This manual will provide you with operating
and maintenance instructions adequate to operate and clean the machine. For additional
product support or ordering information please call Seal Graphics Americas help line at 1-800-
486-6502.
SAFETY PRECAUTIONS
The safety recommendations outlined in this section are to be read, understood and
followed before operating machine.
Keep this information for future reference. Failure to comply with any of the following
safety procedures could result in serious personal injury.
1. To prevent the possibility of electrical shock, do not immerse machine in water or permit liquid to
spill inside.
2. Do not allow articles of clothing (neckties, scarves, papers, etc.) near front or rear machine
openings as they could get caught by rollers and be pulled inside, causing personal injury.
3. Do not insert sharp objects into front or rear machine openings. Do not place anything in feed tray
openings of machine other than appropriate laminating materials or pouches.
4. Do not attempt to laminate items that exceed total recommended material thickness.
5. Do not operate machine for any other purposes than its intended use.
6. Do not operate machine if electrical plug or power cord is damaged.
7. Turn off the power when unattended or not in use. Unplug machine before moving it or when it is
not in use for an extended period of time.
8. This machine is intended for indoor use only.
9. Do not alter or extend electric plug. Plug is configured for appropriate electrical supply.
10. The socket-outlet shall be installed near the equipment and shall be easily accessible.
