background image

11

INSTRUCTIONS FOR CONTROL PANEL

3. HOW TO USE CONTROLLER

***Setting Temperature on Upper/Lower Teflon Coated Rollers***

Button & Display

Press                   button, followed by the              
or              arrow, until desired setting is reached.  
The temperature will change 1°C (2°F) each time 
you press the button.  If you hold the button down 
for more than 1 second it will advance rapidly. 

LOWER

Press                    button, as before, the display will 
blink 6 times.  Before the blinking stops, press            
or                 to reach the desired speed setting.

SPEED

    

Note:  A beeper will sound when pressing 

the key pad repeatedly.

UPPER

Press                     button, which will cause the 
display to blink 6 times. Before blinking is finished, 
press the              or              button to reach the 
desired temperature.  The temperature will 
become set after 5 seconds.

UPPER

LOWER

1. Set Temperature of Upper Teflon Coated Roller. 

2. Set temperature of lower roller via same method

Note:  A beeper will sound when 
pressing the button repeatedly.

***Speed controls

SPEED

*9 different speeds are attainable from 2.6ft/min to over 13ft/min

Содержание EP42




















Отзывы: