INSTALLATION
MANUAL
Product:
Document #:
Rev:
Page:
SEAKEEPER 9 / 7HD
90222
6
4 of 20
Section 1: MECHANICAL INSTALLATION
FIGURE 3
– TRANSVERSE BEAMS CLEARANCE CONSIDERATIONS
Refer to Figure 3 for recommended clearances to transverse beams. If a transverse beam is
located under
the forward brace, it must be 2” (53 mm) from the edge of the saddle beams to
provide the necessary clearance for the swing of the motor power cable during the Seakeeper
’s
precession. Clearances aft of the Seakeeper are shown to provide access for regular
scheduled maintenance.
